| Main > Main Forum |
| Paint Sprayer question |
| << < (3/3) |
| Lilwolf:
someone posted in another thread in the last day or so (read it this morning) about a gravity paint sprayer for 14 bucks. Looked like a good quality one also. at Harberwhatever anyone have the link? or remember the thread it was in? I think it was in one of the project threads..... here it is http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=47016 |
| MovingTarget:
I used a gravity gun on my cabinet from Harbor Freight and I think I spent about $23 on it. I used my neighbor's compressor that I think was 2 or 3 gallon, was a lot better than my 1.6 gallon but it never turned off and I got very mixed results. I did use it to apply the primer as well but that took FOREVER. If I had to do it again I would either get a bigger compressor or just roller the paint on. The results were very good and when there was enough built up pressure in the compressor that gravity gun worked great. Clean up was really easy too. I was just affraid I was going to burn out the compressor motor the whole time. About 1 hour in that thing started to stink. |
| miles2912:
--- Quote from: Lilwolf on April 19, 2006, 01:50:46 pm ---someone posted in another thread in the last day or so (read it this morning) about a gravity paint sprayer for 14 bucks. Looked like a good quality one also. at Harberwhatever anyone have the link? or remember the thread it was in? I think it was in one of the project threads..... here it is http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=47016 --- End quote --- Use 50 lbs for that gun and it works great. I have a good sized tank so it was not working too hard.. I would say the motor ran about 50% of the time. Don |
| Navigation |
| Message Index |
| Previous page |