| Main > Main Forum |
| Stripping Sideart? |
| (1/1) |
| Gunstar Hero:
I have an old Pole Position cab with trashed sideart... whats the best way to go about stripping it off for a repaint? Sanding? Paint Remover? Could it just peel off? Any suggestions welcome. |
| Q*Bert_OP:
Heat the edge with a heatgun, pull of with hands* Warning, Decal may be hot :cheers: |
| RickDIII:
I had this same issue. My cab was laminated so you might not want to try this if yours is painted and you don't want to damage the paint. I used the heat gun (ok, actually the wife's hairdryer - don't tell her) and pulled the sticker off. This left me with a mess of glue. I tried a bunch of stuff before finally parting with $4 for something called "Goof-off". Stuff worked great. Wipe it on the glue, let it sit for about two or three minutes and scrape with a plastic scraper with a rag wrapped over the edge (keeps it from scratching the laminate). Good luck. :cheers: |
| Spaz Monkey:
I'm all for stripping sideart, but the wife won't let me have any ....... opps, I thought we were talking about something else. And before anyone else does it, I'll do it first.... :lame: |
| Q*Bert_OP:
:dizzy: OK...Get your mind out of the gutter :dizzy: |
| Navigation |
| Message Index |