Main > Main Forum
Mounting: Replacement Joystick for MS Pac-Man/ GALAGA
<< < (2/2)
AtomSmasher:

--- Quote from: eschmunk on March 31, 2006, 01:40:21 pm ---I have the ms pacman/galaga 4 way.  I mounted it by recessing the cp from the top.  I cut a hold to fit the base and routed the top.  After you lock it down then I put the switches back on.  Works great.

--- End quote ---
Thats what I did too, works great.
RobotronNut:
for the ms-pac / galaga reunion:
if you want to bottom-mount it without routing, you can use the link in my signature to obtain a tornadoterry shaft and mcmaster-carr ball knob or a betson joystick. i'm using both, and they're both working well for me.
quarterback:
I replaced my Ms. Pac reunion shaft with a longer Wico red balltop.  A while back I removed it from my CP and I'm selling it in B/S/T if you're interested.

LINK
RickDIII:
I just did this over the weekend.  Did a write up on it today.  Would have put it in here if I was paying attention.   :dizzy:


http://forum.arcadecontrols.com/index.php?topic=52286.0
Navigation
Message Index
Previous page

Go to full version