Main > Main Forum
Trick for this darn e-clip on the P360?
<< < (2/4) > >>
dpz147:
Thanks for the replies.  I'll give it a try this evening.   :)
RichyRich:
Are You using a slikstik handle?if so dont use the spacers, there not meant to be used with their handles.
dpz147:
No, just the one that came with the 360.  Eventually, I'm hoping to replace my dedicated 4-way with a red ball top though.
rdagger:
You are suppose to cut the metal bushing down to 1/2" for wood or 5/32" for a metal CP.
I'm talking about the cylindrical  bushing just above the pivot bushing.

It also helps to take 2 vice-grips and loosen the "E"  ring.  It doesn't need to be so tight.

Here is the info that came with mine.
dpz147:
That seems to be for the Wico stick...mine is the one that came with the 360.

But, if I had to cut it, what is the best thing to cut it with?
Navigation
Message Index
Next page
Previous page

Go to full version