Main > Main Forum
need happ P360 measure.
<< < (3/5) > >>
Flinkly:
you could mount a 360 the wrong way and just change the contacts.  see, it has contacts labeled up down left and right, but if you oriented the joystick the skinny way, you could just change left and right to up and down and vice versa.
RichyRich:
Hey fozzy, are you sure thats the right way round? if I pushed up on mine with your template it would activate right or left.Mines 90 degrees rotated???

EDIT:you could be right fozzy,I think I remember undoing the four screws and turning it now ,so its easily altered.

bossyman if you follow the link that Quarters kindly posted, the outside holes are the exact size of the 360.There are no inside holes on the 360 like other Happ bases which is why it wont fit your pattern but like I said earlier you could drill your own.
Fozzy The Bear:

--- Quote from: RichyRich on March 25, 2006, 02:41:51 pm ---Hey fozzy, are you sure thats the right way round? if I pushed up on mine with your template it would activate right or left.Mines 90 degrees rotated???

--- End quote ---

Interesting.... Mine in my first panel is that way round.... rwhip41 appears to have it that way round as well according to his measurements.

Best Regards,
Julian (Fozzy The Bear)
RichyRich:
Just checked and you can rotate it so you can have it either way but it is sent like your template.
bossyman15:
Everybody thank you for your repies. Those info are very helpful. I will check it out when I get home from work within the hour.
Navigation
Message Index
Next page
Previous page

Go to full version