| Main > Main Forum |
| A couple questions regarding bolt patterns on many joysticks |
| << < (2/2) |
| Havok:
I used the same 1 1/8" bit for my 360 center hole as my buttons. It looks like you could use much less... |
| Tahnok:
Thank you very much. That's what I needed to know. |
| u_rebelscum:
--- Quote from: RichyRich on March 27, 2006, 07:26:46 am ---The shaft hole diameter for the 360 doesn't have to be so big.Mine is only 12mm(under 1")and doesn't touch,thats on a 1/2" wood panel though.Hope this helps. --- End quote --- The total thickness makes a big difference. 3/4" wood plus 1/8" lexan top needs a bigger hole, while a 3/4" wood routed to 5/8 with not overlay can do the "normal" 1 1/8" hole, IIRC. |
| RichyRich:
yeah thats right,that's why I included the thickness of the panel.Obviously the thicker the panel,the larger the hole has to be unless routing.Maybe I should of stated that.Thanks u_rebelscum. |
| Navigation |
| Message Index |
| Previous page |