Software Support > PowerMAME

USB problem isolated!!

<< < (4/14) > >>

MikeQ:
It's there

JoyMonkey:
I've got LEDs 4,5,6,7,8,9 and 30,31,32 hooked up.

When I run the testbench.exe, 4,5,6,7,8,9 are in a constant synchronized sawtooth, 30,31,32 are on (not sawtoothing)

JoyMonkey:
The LEDWiz control panel gives me really random results with this motherboard. To test it out properly, I guess I'd really have all 32 outputs connected to LEDs.
For example, when I set 4,5,6,7,8,9 and 30,31,32 to saw and turn them on 30,31,32 will saw but 4,5,6,7,8,9 remain constantly on.
Now when I set 1 to saw, but leave it off, 4,5,6,7,8 begin to saw, 9 remains constantly on and 30,31,32 continue to saw.
Then I switched 6 to square and 4,5,6,7,8,9 went constantly on, 30,31,32 ocntinued to sawtooth.
Switching 6 back to saw does nothing.

 ???

MikeQ:
I've got another test up on the site.  Same Zip file. 

If you can, give it a try.  I'm messing with different methods of purging data to the device.

JoyMonkey:
This new one makes all my LEDs saw really quickly (faster than the LEDWiz control panel).

But now when I run your first testbench.exe, I get the same thing- all leds are sawing now.

I'm going to restart and see what they do.

Navigation

[0] Message Index

[#] Next page

[*] Previous page