| Main > Main Forum |
| IPAC LED driver board |
| << < (2/4) > >> |
| whammoed:
Sure, I can supply you with some leds, how many do you need? looking for the camera now... |
| ahofle:
3 red would be fantastic. PM me what I owe you and the payment details. Thx again! :) |
| whammoed:
Here is a pic of the board. Let me know if you want it and how many LEDs you need. If you do I will pm you with a shipping charge. |
| ahofle:
Sweet, just to make sure I understand...the board supports two LEDs right? Where do the LEDs need to be grounded to? Also, I assume the LEDs actually only need the 5v and ground from power supply right? |
| whammoed:
Yes, 2 LEDs. The leds get the 5v from the terminals marked LEDs out. (use a resistor, I will give them to you) Ground to Terminal Marked "G" next to the 5v. You only need to hook up the +5v and ground from the power supply. The 12v is just there to provide terminal blocks if you have things that need 12v. |
| Navigation |
| Message Index |
| Next page |
| Previous page |