| Main > Main Forum |
| Humming noise coming from power supply |
| (1/2) > >> |
| Wir3d:
The humming noise only happens when the jamma harness is unplugged from the PCB. its in a MK 2 cabinet btw....any solutions as to why this is happening? its more like a pig squealing noise. |
| Wir3d:
My neutral (white) wire coming from my power cord is getting 120V and my black (hot) wire is reading 0 on my tester..could this be a problem? |
| SirPeale:
--- Quote from: Wir3d on March 14, 2006, 07:29:04 pm ---My neutral (white) wire coming from my power cord is getting 120V and my black (hot) wire is reading 0 on my tester..could this be a problem? --- End quote --- That's backwards. White is hot, black is neutral. No, you're hearing noise because you've taken the load off it. Squealing from a PS isn't good in any event. Likely it has bad caps. I suggest either replacing it, or recapping it. |
| Wir3d:
ok, thanks peale, and ive tested the voltage on the +5v -5v +12v and there all giving me a reading of about 1.8v when powered on, so i think the power supply is bad |
| Ken Layton:
You have a power supply that REQUIRES a load be connected to it at all times it's powered on. WARNING: it will be damaged if you leave it that way. Either unplug the AC power going into it or connect a gameboard to that power supply now. |
| Navigation |
| Message Index |
| Next page |