Software Support > PowerMAME

Confusion about ledwiz.cfg and individual .lsq files

<< < (3/3)

Circo:
At least I know it's not because I have a bad LED-WIZ.  Thanks for your help.

2600:
Couple of  things that stand out that I would check are:

Does this only happen on OHCI USB controllers?

You said the default coin event is fast.  How fast are we talking about in ms?

As for the hubs, Are they 1.1 hubs or 2.0 hubs?
I'd ask what the other devices were on the hubs, but since it happens without other devices on may be moot.

MikeQ:
I solved this mystery today.  It appears to be a timing related issue and talking to the LEDWiz with sequential commands really fast throws it off.  I found that applying a small delay after any LWZ-PBA command solves the problem.  The controls lighting is the only place that this doesn't happen.  The LWA sequences apply the "duration" to each command so the problem doesn't exist when running an LWA.  Controls lighting however is generating a sequence on the fly and sends commands as fast as they are generated.  The controls lighting only does a LWZ-PBA in order to reset any intensities that were previously set so a 10ms pause at the initiation of the sequence won't be a problem.

I'm not sure why hubs and certain computers show this problem while others never do.  I'm sure it has something to do with different USB implementations though.

CatttDaddy:
Hey guys
I was wondering if this was fixed? I have PM 105 but I still have this problem... I was wondering if there is any way to fix the control panel issue or is there some way I can go in and fix it myself?

Navigation

[0] Message Index

[*] Previous page