Main > Main Forum
Any chance of a 2 1/4" trackball on my CP?
(1/2) > >>
Ninten-doh:
I bought an old Frogger cab (converted to Ring King) for $30 to use for my first MAME cab.  The CP is on the small side (24" x 7" I believe).  I'm planning to set up a 2 joystick/6 button per joystick configuration.  Imagine the X-Arcade minus the 2 bottom buttons for each joystick.  I really want to add a 2 1/4" Happs USB trackball, but from what I can tell on the Happs website, I'll need 6" of height and 6" width clearance for the thing.  I could extend the height of the CP I guess so that it "juts out" past the sides of the cab, but am I screwed by the 24" width?  I don't have to have all 6 buttons per joystick if reconfiguring that would help.

Or is the space I'm working with not even worth trying to figure something out?

I could post a pic, but I'm not sure how to attach it (does it have to be a link or can I attach it?)

Is there any other info I could provide that would be helpful?
whammoed:
That arrangement can fit in less than 21 inches.  I mocked it up in illustrator, here is a screen cap:
Ninten-doh:
Thanks Whammoed!

Is the trackball too close to that second joystick?  Meaning, am I going to slam my hand into it all the time?   ;D
Ninten-doh:
Here's the pic of the cab, BTW...
whammoed:

--- Quote from: Ninten-doh on March 01, 2006, 11:00:28 am ---Thanks Whammoed!

Is the trackball too close to that second joystick?  Meaning, am I going to slam my hand into it all the time?   ;D

--- End quote ---
That depends on how you play and what game.  On a game like centipede where you don't want to give it a hard spin it is absolutely fine.  Marble Madness would be another story though.
Navigation
Message Index
Next page

Go to full version