| Main > Main Forum |
| repainting buttons/controls |
| (1/2) > >> |
| shardian:
Hello all, This is my first post here so be gentle. I have finished reading Project arcade, and have started to source my components for my arcade machine. I got two 8-way sticks and some buttons really cheap. I would like to paint them all to match if possible. I have searched the forums here and could not find a post dealing with refinishing used controls. What I am proposing is using enamel model paint sprayed thru an airbrush. I would like to get some feedback from anyone else who has possibly tried to restore used controls before I go and possibly ruin these buttons and joysticks. Any feeback would be greatly appreciated. Thanks! |
| SirPoonga:
paint is going to add a little it of thickness so that could be a problem. I'd use Krylon's plastic paint. |
| kaz1961:
Are the buttons for leaf switches? If so, what colors do you need? I have some old ones you could have if the colors are right. If you are going to paint them I would suggest using Fusion spray paint for plastic. It holds up better than regular paint. |
| shardian:
The buttons I have are Ultimate buttons. there seems to me to be enough play in the button to allow a coat of paint on each part. What I was most worried about was durability of the paint. i thought of the model enamel paint because, well, it is enamel and is tough. i have not actually handled the models I built when I was younger alot to be sure of durability, and wanted to make sure the paint would withstand the arcade torture test. ;) by the way, thanks for the quick replies. |
| divemaster127:
Im afraid any paint you use will flake off over time thanks dm |
| Navigation |
| Message Index |
| Next page |