Main > Main Forum
Killer Instinct Cab Questions
Jakobud:
The KI/MK/MKII/MKIII cabinets are all based off that great Midway cabinet design. I love it. I loosely based my cabinet designs off of it.
brandon:
Here a pic from KLOV that might help someone trying to build this thing... Doesn't look that complicated.. (BTW, I've never built a cab before) ;D
P.S...If you look closely you'll notice that this Mk3 cab was once a KI. you can tell by the 6 button layout and the nintendo sticker on the side..
jets:
Actually, that is an MK3 cabinet - with a KI control panel swapped in the originals place ;D
cdbrown:
Sonic,
Any chance of getting horizontal and vertical measurements instead of the parallel ones. Can work out the angles if we know the other two measurements. Also is the 71cm supposed to be from the back of the cab to the back of the panel?
I'm glad you posted what you did as I'll probably be having my cab like this.
Cheers
-cdbrown
OSCAR:
Based *entirely* off of SONIC's dimensions, I sketched up what it would look like and filled in some missing dimensions and angles. I don't understand the 71cm dimension in SONIC's sketch, it is shown longer than the 99cm dimension along the bottom of the cab, so I ignored the 71cm one. Anyway, perhaps these sketches will help, but I can't verify that they are correct because I don't have one of these cabs. The first pic shows that I matched SONIC's dims, and the second pic is the rest of the dims. Dims are in mm / [inches] format. If anyone is interested in my AutoCAD file, it is at http://www.oscarcontrols.com/tmp/KillerInstinct.zip. (Note I drew the cab full scale in millimeters, so you have to scale it by .03937 for inches.)