| Main > Main Forum |
| What tools did you use to build your cabinet? |
| << < (4/7) > >> |
| markrvp:
--- Quote from: Buddabing on February 25, 2006, 02:00:45 pm ---A credit card with a hefty spending limit. :o --- End quote --- Ha Ha. ;D That is definitely the one that got used the most. |
| HOTR6:
Well I got Lowes to make most of the long straight cuts. I stood there and made sure to help and make them get it right. I used a jig saw to make the rounded cuts and cuts into the CP for the trackball and the coin door in front. A table saw to make the smaller straight cuts. A sander A pocket hole jig and bits A hole saw bit Glue Iron Drill I have both a cordless and a corded. I suggest the corded for this prject because you have more power and don't have to wait for it to charge. You need a smaller flat screw driver, for putting the wires in the Ipac A level for getting things straight and level |
| M3talhead:
1st Aid kit. I dont care who you are or how much experience in woodworking you have. You need it.... |
| BobA:
Beer You cannot build a cab without it. |
| rackoon:
Vodka and a good marriage counselor. ;D |
| Navigation |
| Message Index |
| Next page |
| Previous page |