| Main > Main Forum |
| Best wood putty to cover scratchs for MDF |
| << < (3/4) > >> |
| ragnar:
--- Quote from: kaz1961 on February 24, 2006, 08:45:55 pm ---I use MH Ready Patch. You can buy it in Home Depot in the paint department. It comes in cans premixed. The stuff works great and goes on and sands easily. --- End quote --- I am thinking that this is hte best option. ANyone else use this? I want to use it for filling in holes from countersinks. |
| javeryh:
Everyone should really be using bondo for this type of stuff. It sands easy but is rock hard. There's really no reason to use anything else, IMO. :dunno |
| bkenobi:
Bondo requires mixing and then cleaning tools. If you use a putty product (especially a premixed one), things go much quicker for a small job. If you are doing more than a spot or two, it's probably better to just use the good stuff. I used a wood filler product that I got from Depot that has worked ok. It won't create a structural fix though, so when I run out, I'll get bondo. |
| javeryh:
--- Quote from: bkenobi on August 11, 2010, 08:15:01 pm ---Bondo requires mixing and then cleaning tools. If you use a putty product (especially a premixed one), things go much quicker for a small job. If you are doing more than a spot or two, it's probably better to just use the good stuff. I used a wood filler product that I got from Depot that has worked ok. It won't create a structural fix though, so when I run out, I'll get bondo. --- End quote --- I use toothpicks to mix and posterboard to apply and then I throw it all out! Works great and no clean-up. :cheers: |
| bkenobi:
You don't have to mix a large batch? I thought that the package only gave mixing directions for 1+ cups of bondo. I guess you could just eyeball it since this isn't structural stuff anyway. |
| Navigation |
| Message Index |
| Next page |
| Previous page |