First of all my cab basic construction is complete except for coin door panel and CP!!
Okay now for the strange part! The 26" coin (front) panel when slid into place sits flush at the base (which is exact 26"), but about half way up the coin panel it is no loner flush.! It is off starting at about half way and continuing gradually all the way to the top where it becomes about 1/16th off.
My first thought is the coin panel is not exact, but a quick measurement proves this is not the case.
Next I begin to measure the distance of the cabinet sides and this is where the problem sits. The sides start out at exactly 26" at base, but then begins to become wider gradually. A check with the level and the sides are pretty much dead level.
Should also include, all my panel pieces are exact 26"..
Anybody have any thoughts?? Help my insomnia is getting worse and worse!