Main > Main Forum
i-pac or keywiz??
<< < (4/4)
miles2912:

--- Quote from: markrvp on February 23, 2006, 07:29:29 pm ---Yes, there is a 10 pin header with three 5v taps.

--- End quote ---
.

That 10 pin header plugs into the mini pac if you want to use a trackball and/or spinner.  If not then you can use it for whatever.

Don
markrvp:

--- Quote from: SurferMatti on February 23, 2006, 07:50:47 pm ---
--- Quote from: markrvp on February 23, 2006, 07:29:29 pm ---Yes, there is a 10 pin header with three 5v taps.

--- End quote ---

Ok cool thanks...  So in order to use the Perfect's with the Mini Pac must I have the Mini Pac w/ the optional Optical inputs (69$ one),  or is that only used for the trackball/spinner, and a Mini Pac Standard will work?

Thanks

--- End quote ---


It is my understanding that there are no differences in the Minipac boards.  The difference is the harness which either does or does not have the connections for the optical devices.  If anybody can confirm this I would appreciate it.
Tiger-Heli:

--- Quote from: markrvp on February 23, 2006, 09:11:08 pm ---It is my understanding that there are no differences in the Minipac boards.  The difference is the harness which either does or does not have the connections for the optical devices.  If anybody can confirm this I would appreciate it.

--- End quote ---
That's what I've heard also.  I was told a future version might not have all the code embedded, but currently all the Mini-Pac boards are identical and only the harnesses are different.
Navigation
Message Index
Previous page

Go to full version