| Main > Buy/Sell/Trade - non-retail |
| Any interest in Candy cabs? |
| << < (13/15) > >> |
| nullb0y:
oooo empty cabinets would any of them fit a 36" tube? |
| Goz:
Along with my request for $ I requested spec and dimensions of the various cabs especially the super king and so far the only reply I have recieved from them says 'Will look into it" You would think that if they offer cabs that this type of into would not only be readily available but on the web. |
| Dave_K.:
--- Quote from: Goz on March 17, 2006, 08:22:00 am ---Along with my request for $ I requested spec and dimensions of the various cabs especially the super king and so far the only reply I have recieved from them says 'Will look into it" You would think that if they offer cabs that this type of into would not only be readily available but on the web. --- End quote --- My request was much simpler since I asked for price of just one cab shipped without the monitor, and also got a "will check for you" response. I bet they just partnered with another supplier of those chinese cabs, and have to ask them for the details. |
| zakk23:
These things are going to be a big unknown, and you may never get good answers. For example, the Naomi Universal replica cabinet. Is it a good enough replica that offical control panels will fit correctly? And if the cabinet comes with all the wiring, were they kind enough to use the same type of connector for the control panel wiring? Not to mention is it wired as JVS or Jamma etc etc. I'd probably be willing to order one without knowing any of this, but if you're not the type to get your hands dirty, you run the risk of getting something that isn't 100% plug and play. Dave: I bet the shipping is cheaper, but the problem is it's cheaper in comparison to the full assembled cab with monitor. The coinopexpress rates for shipping single cabs are pretty steep, and even if you half that... Some of the 'kit' panels still need to be pretty big, I wonder if it would even be shippable via EMS. When (if) you get a response, let us know, I'd be interested in ordering a without-monitor cab myself. |
| Mr-Megalo:
Zakk, yes an official Sega CP will fit perfectly, I breifly owned a Naomi clone last year, firrst job was fit a new CP . NO its not wired to JVS - if it was wired to JVS, it would cost a fortune, JVS or "JAMMA2" as it is known to some, uses some fairly expensive I/O boards, stereo amps and PSU's - at best the cabinet will be wired to JAMMA with a cheap generic china brand PSU. to be honest, when I got mine, I had to more or less rebuild half of it anyways to sort out some earthing issues, monitor discolouration, new CP, extra wiring harness and generally making sure the cabinet all sat flush, originally it looked like it had been thrown together and nothing sat right (CP surround for example was not flush with the monitor plastic surround) IMVHO - pop a tri res 29" monitor in, use a decent PSU and a new CP instead of the china brand knock off buttons/sticks and they make a good cabinet, not a patch on the real Sega cabs tho but they do do a decent enough job structurely. slight note, the Naomi clones weigh approx half as much as the real deal |
| Navigation |
| Message Index |
| Next page |
| Previous page |