| Main > Main Forum |
| How can I tell if the I-pac 4 will work with my pc in Dos mode? |
| (1/2) > >> |
| RickDIII:
Ok, I'm finally getting ready to kick my project into gear and finally got the $$ to get some of the things I want. I was looking at the i-pac 4 for encoding. I am running a PII 500. I thought I would run it in straight up dos mode. Do I need to actually run windows? From the Ultimarc site about the ipac 4: --- Quote ---No special drivers needed. USB drivers are generic Windows. On many motherboards USB will work in DOS. --- End quote --- How can I test if USB will work with DOS on my machine? Thanks for all feedback! |
| whammoed:
Do you have a regular usb keyboard? If so plug it in and check it out. Why not just use it with the ps2 port though? |
| RickDIII:
I thought the ipac 4 had to be used with usb. Did I miss where it says it can be used with PS2 port? ??? |
| Hoopz:
--- Quote from: RickDIII on February 16, 2006, 11:19:01 am ---I thought the ipac 4 had to be used with usb. Did I miss where it says it can be used with PS2 port? ??? --- End quote --- Yep, you probably missed it. From Andy's website: --- Quote ---56-Input button/joystick switch interface. USB or PS/2. --- End quote --- Since you are using DOS, PS2 will probably be easier for you. Good luck. :D |
| eccs19:
--- Quote from: RickDIII on February 16, 2006, 11:19:01 am ---I thought the ipac 4 had to be used with usb. Did I miss where it says it can be used with PS2 port? ??? --- End quote --- You can order it as either USB or PS2. You confirm what one you want when you order. If your using DOS then I would recommend PS2 version. Even PS2 version if running 95/98/ME. USB worked with these, but they all had some troubles. 2000 and XP should be OK USB version. |
| Navigation |
| Message Index |
| Next page |