Main > Main Forum
I-Pac Programming (Problem Fixed!)
eccs19:
--- Quote from: Tiger-Heli on February 17, 2006, 08:26:57 am ---Or it may have been old but had the chip upgraded. Andy sells a chip replacement for the older boards. I guess the best advice for new users is to try all the software versions.
Glad you have it working!
--- End quote ---
It must have been shipped with the chip upgrade. Only thing that makes sense.
I'm glad to got it working also, now I've got it programed, and ready to go into my bartop. I was kinda on hold because of it. 8)
Level42:
Good you figured it out :) I've got a J-pac and recently bought a second hand (but never used) I-pac (together with a ton of other arcade parts including an Oscar :):)).
This came with a seperate upgrade chip. It's the big chip on the I-pac. The upgrade version had a tiny extra chip mounted under the big one. There's some soldered wires going to several pins on the big chip. The guy I bought it from hadn't even placed that upgrade on the I-pac yet ;)
Anyway, haven't tried it yet, but the soldered wires on the pins of the big chip should give a clue on wether it's un upgrade or not.....
Tiger-Heli:
If it works with the new software, it upgraded. No need to go pulling the chips unless Eccs19 is overly curious NTTIAWWT.