| Main > Main Forum |
| Please give some feedback on my joystickprojects? |
| (1/3) > >> |
| mrlowalowa:
Hello everyone! Name is Andreas and I |
| M3talhead:
If I understood your post correctly, you want to build your own control panel for an Xbox and play fighting games on it. Its been done many times and there are a ton of plans and blueprints floating around if you spend the time to look for them. 1.4mm is incredibly thin and I cant imagine a CP being very durable with that thickness. If you want to take the time and make it yourself, there are a lot of people here that can help, but if you don't have the tools or time to design and build a box of your own, I'd recommend going with one of the following pre-made products. http://www.x-arcade.com/products.shtml http://www.hanaho.com/products/HotRodJoystick/overview.html http://www.slikstik.com/fightfeatures.htm |
| mrlowalowa:
I want to build my own stick(s). I pretty much have the design figured out! :) So it |
| markrvp:
127mm (1/2 inch) is probably the thinnest MDF you would want to use for the top where the joystick and buttons are. |
| mrlowalowa:
Are you sure, I mean that is as thick as the stick! What about optical vs microswitch sticks. Why are the optical so hard to find. Doesn |
| Navigation |
| Message Index |
| Next page |