| Main > Main Forum |
| Glass Options for Arcade Displays... |
| << < (3/3) |
| Extreme8:
I originally used plexi with an automotive type tint film and, while it looked fine it just didn't seem right for some reason. It was mounted at a slight angle and because of the size of the piece of plexi it tended to bow slightly in the center and would create odd reflections and distortions. A thicker sheet of plastic would probably have resolved this. I also noticed slight scratching when I cleaned the surface. None of this was a very big deal, but since I had invested so much in the cab why cut corners on the part that you would be looking at/through most often? I purchased a piece of grey tinted tempered glass ($60) but after I got it mounted I discovered it wasn't dark enough. I added a sheet of the automotive tint to the back (also grey - 30% VLP was perfect) and now the setup is ideal. |
| Sinner:
I ordered the tempered...thanks for the help guys... |
| Navigation |
| Message Index |
| Previous page |