| Main > Main Forum |
| Weird problem with I-Pac 2 and pushbutton |
| (1/1) |
| KungFuJoe:
Everything works fine with my ipac except for one button. The problem with that is that it only "registers" when you depress and let go of the button. Basically, when I push it down, nothing happens, but when i let go it registers a keystroke. I know it sounds like something wrong with the button/switch or that I have the wire connected to the wrong lead on the switch but I confirmed that everything is wired to the right spot and I even tried replacing the switch. If I open notepad or some text editor and hit that button, nothing shows up when I push it down (as expected) but when I release it...TWO characters show up...it reacts like I hit it twice really quick. And lastly...during some 2 player simultaneous games (like R-Type Leo, etc) whenever Player one starts up in the middle of the action, it will sometimes "freeze" all of Player 2's controls for a second or two. Anything I should be looking for? Could it be the IPac itself? |
| leapinlew:
Sounds like you have the wire on the wrong prong to me. |
| brophog:
Either connected to a NC instead of a NO or it's the SHIFT button (default player 1 start). As with all Ultimarc problems, send it to Andy. He's helpful, thorough, and he checks his email every day. |
| KungFuJoe:
It's definitely not connected to the wrong prong...that was the very first thing that came to mind and I tried both prongs and another switch just to make sure... I will email Andy though... |
| AndyWarne:
I would assume the offending button is Start1. This is the shift button by default and sends the keycode on release. But is should not send two presses nor cause a delay. Hopefully we can resolve this by email. Andy W |
| Navigation |
| Message Index |