| Main > Main Forum |
| what else will work? |
| (1/2) > >> |
| SlammedNiss:
in the process of building my control panel, i've seemed to have lost one of the black washer-like things that go on the joystick to hide the hole made for the joystick. I looked at a local small hardware store for a black plastic washer, but they didnt have anything close. the joystick was purchased from ultimarc, and i'd like to find an alternative to buying another controller. the "washer" is 2 1/8" in diamer, with a ID of 5/8". TIA |
| Tahnok:
Contact Andy and see if he will sell you another one. That is probably the easiest. |
| CheffoJeffo:
What size is it ... I'll check my big bag of joystick parts. Cheers. |
| TravistyOJ:
I have a lot of thes lying around, I can check for you and see if i have one |
| SlammedNiss:
--- Quote from: CheffoJeffo on January 30, 2006, 10:20:32 pm ---What size is it ... I'll check my big bag of joystick parts. Cheers. --- End quote --- OD is 2 1/8" and ID is 5/8" thanks |
| Navigation |
| Message Index |
| Next page |