Author Topic: Vinyl player 1-4 stickers $1.45 shipped (USA) and arcade sheet (Read 86213 times)

whatzcrackn · « **Reply #40 on:** March 14, 2006, 11:25:07 pm »

Okay kool, what do the new sheets look like?

Or our we looking at the same ones?

MikeDeuce · « **Reply #41 on:** March 14, 2006, 11:37:40 pm »

Ahh was just about to send you a PM. Still working hard on them, I've broken out the sheets into chunks that make sense, so they can be priced a little lower, and so people only have to buy the ones they like.

Working on all the "reversed" type of button designs for translucent buttons from the other thread.

Adding a few of classic game character vinyls as well (this is taking a little while), most of which will have very modest prices. Not really for cabs specifically, since this isn't side art sized, but for windows, cars, whatever you want to put them on.

Also have the complete PS2 and xbox button sheets (including single color OR color coded ones for the xbox buttons).

And everything should be ready to go this weekend, around the same time the vinyl is cut and ready to use. Sorry about the delays, but I am making some additional changes that I think everyone will enjoy

Thanks!
mike

mccoy178 · « **Reply #42 on:** March 15, 2006, 12:45:53 am »

Excellent work! Thanks for the effort!

NiteWalker · « **Reply #43 on:** March 15, 2006, 08:55:00 am »

SWEET! I'll get another order ready for this weekend. It'll consist of purple, blue, pink (yes pink), red, and green.

MikeDeuce · « **Reply #44 on:** March 15, 2006, 12:21:17 pm »

Very cool, I'll look forward to it

(pink can be macho, really!)

Please let me know if any of you would like small samples of the new colors... especially if you are trying to match an existing theme.

NiteWalker · « **Reply #45 on:** March 22, 2006, 07:53:06 am »

Any update on these?

shardian · « **Reply #46 on:** March 22, 2006, 08:35:58 am »

Hi,
Just wanted to publicly say thanks for the stickers. They matched up perfectly with the worn P1 & P2 labels on my used start buttons. Now they look brand new!

MikeDeuce · « **Reply #47 on:** March 22, 2006, 12:45:00 pm »

@Shardian: thanks for the post, really glad they worked out!

@NW: Slight update, I have failed to complete all the designs I set out to by my deadline, thanks to the button discs slowing me down. BUT I did chop all my vinyl spools down to size this weekend and can make anything I've done so far in all the new colors.

NiteWalker · « **Reply #48 on:** March 22, 2006, 01:16:55 pm »

I really just use the 1-4 players so let me know when you have some in the new colors cut or if it's not difficult to cut to order let me know and I'll tell you my order.
Thanks
NW

MikeDeuce · « **Reply #49 on:** March 22, 2006, 01:54:31 pm »

Quote from: NiteWalker on March 22, 2006, 01:16:55 pm

I really just use the 1-4 players so let me know when you have some in the new colors cut or if it's not difficult to cut to order let me know and I'll tell you my order.
Thanks
NW

I can have em cut tonight (unless you need 1000 of them -- that could take a couple days

)... And it wouldn't be tough to cut to order at all, please feel free to PM or email (dage@pixelstorm.net) any time and I'll take care of you.

Thanks!
mike

Havok · « **Reply #50 on:** March 23, 2006, 11:07:42 pm »

Got my vinyl stickers today - absolutely perfect! Thanks Mike!

MikeDeuce · « **Reply #51 on:** March 24, 2006, 04:38:18 pm »

Quote from: Havok on March 23, 2006, 11:07:42 pm

Got my vinyl stickers today - absolutely perfect! Thanks Mike!

Very cool, thanks for the update!

NiteWalker · « **Reply #52 on:** March 30, 2006, 03:07:25 pm »

Got my stickers today. Perfect again. Thanks Mike! Another order soon...
I like the larger sized guys for the 1 and 2 players. I'll order some of those in red next time too.

Edit
This needs to be stickied!

Tahnok · « **Reply #53 on:** March 31, 2006, 12:56:29 am »

Got my stickers today. They look great! I can't wait to get them inside some translucent buttons. It's a really nice touch that you included the transfer paper. I'm sure I will have one or two more jobs for you. Thanks again!

whatzcrackn · « **Reply #54 on:** March 31, 2006, 01:00:23 pm »

So do you have anything new Magic Mike? I am still in need of the letter sheet with the labels around the buttons, never heard back on the them, actually it was the whole sheet. (ie the one that was emailed to you from some user)

eccs19 · « **Reply #55 on:** March 31, 2006, 01:48:16 pm »

Mike, just wondering, what is the max size that you can cut? (sheet size) From the sounds of it, you machine is perfect for doing small things like your doing. My machine is a large machine that can do approx 20" rolls. I thought it would be good to mention that if you have a request that is to big for your machine, someone could PM me, and I may be able to help out. If someone has small stuff they want done, ask Mike, as I'm sure his machine is MUCH more suited for it. Mine is better suited for large stuff.

MikeDeuce · « **Reply #56 on:** March 31, 2006, 04:07:30 pm »

Thanks NiteWalker and tahnok100!

I surely do hope to keep everyone satisfied

Hey whatzcrackn, I can do an underwrap set like this for $5 shipped:

For the *huge* sheet I think I have to ask $25 shipped fully weeded. It really is a looooong job with a lot of small, complex pieces. When it is broken up into chunks its a lot better because it's really the two sets of under-button wrapped decals and the two lift and turn 4/8 way decals that drive the time up on that sheet. PM coming, too.

Quote from: eccs19 on March 31, 2006, 01:48:16 pm

Mike, just wondering, what is the max size that you can cut? (sheet size)

Yep, you're 100% correct, I can't cut anything larger than 10"x39" at a time. So you are definitely the man for the big jobs!

Just do me a favor and don't let the ladies know you have a bigger one than me

eccs19 · « **Reply #57 on:** March 31, 2006, 06:25:27 pm »

Quote from: MikeDeuce on March 31, 2006, 04:07:30 pm

Yep, you're 100% correct, I can't cut anything larger than 10"x39" at a time. So you are definitely the man for the big jobs!

Just do me a favor and don't let the ladies know you have a bigger one than me

I'm actually suprised. I didn't think your machine would do sheets as big as that. It's not nearly as bad as I would have guessed. That should keeep you going for a while I expect.

I don't think there are that many ladies on this site, so you should be OK.

NiteWalker · « **Reply #58 on:** April 01, 2006, 07:48:23 pm »

Mike is the greatest

And they are a close match to Happ buttons!

I have to admit though, that I like the bigger guys better. So that means a new order in a few days, Mike.

whatzcrackn · « **Reply #59 on:** April 01, 2006, 08:35:26 pm »

That is why I call him 'MAGIC MIKE'

NiteWalker · « **Reply #60 on:** April 01, 2006, 08:47:45 pm »

Magic indeed. And I thought I'd be stuck with white or black 1P buttons.

MikeDeuce · « **Reply #61 on:** April 03, 2006, 02:02:38 pm »

Ahh you guys

Thanks a lot for the comments, hope to keep doing business with you!

And its great to see action pics, those are amongst the first I've seen

NiteWalker · « **Reply #62 on:** April 20, 2006, 11:43:48 pm »

Order Time!
Email sent.
Peace
NW

kiddk1 · « **Reply #63 on:** May 12, 2006, 01:21:47 pm »

Quote from: MikeDeuce on March 31, 2006, 04:07:30 pm

Thanks NiteWalker and tahnok100!

I surely do hope to keep everyone satisfied

Hey whatzcrackn, I can do an underwrap set like this for $5 shipped:

For the *huge* sheet I think I have to ask $25 shipped fully weeded. It really is a looooong job with a lot of small, complex pieces. When it is broken up into chunks its a lot better because it's really the two sets of under-button wrapped decals and the two lift and turn 4/8 way decals that drive the time up on that sheet. PM coming, too.

Quote from: eccs19 on March 31, 2006, 01:48:16 pm
Mike, just wondering, what is the max size that you can cut? (sheet size)

Yep, you're 100% correct, I can't cut anything larger than 10"x39" at a time. So you are definitely the man for the big jobs!

Just do me a favor and don't let the ladies know you have a bigger one than me

hey mike, I am looking for button labels like the ones above, I need various ones (26 in all) raning from fire 1 to exit, volume, pause and so on. Please let me know how much and what other info you need. thanks

Quarterhorse · « **Reply #64 on:** May 21, 2006, 09:06:36 pm »

Mike sent me some underwraps and I applied them to my cocktail cabinet's administrative buttons. This was on wood with multiple polyurethane coats. They went on easily and look professional. I hope this inspires more to do the same.

Transaction was smooth, quick, and exactly what I wanted was shipped to me. Thanks Mike!

MikeDeuce · « **Reply #65 on:** May 22, 2006, 04:44:00 pm »

Awesome -- Thanks for taking the time to post the pics and kind words!

gonzobrian · « **Reply #66 on:** May 22, 2006, 05:28:14 pm »

I got a set of4/8 way stickers for my t-stick+ dust washers and they look great. If you get any go with white as I ordered black and you would not be able to see them so I painted the dust washers white and it turned out great. Thanks Mike You da man

MikeDeuce · « **Reply #67 on:** June 06, 2006, 11:58:00 pm »

Looks great! Sure is easy to read.

Also a minor update:

Got some more supplies in today (needed more red, white and black vinyl), including "chrome silver"

Usually chrome vinyl is said to only last about a year, outdoors IIRC, but this stuff is supposed to be fade resistant for 5 years. Sad part is the stuff costs 2x as much for 1/2 the amount of material, so this is a special option material and the price will be higher for items using this stuff. But I'll base that on the amount of chrome vinyl used per jobbie, so feel free to PM or email me for quotes.

thanks!
mike

NiteWalker · « **Reply #68 on:** June 07, 2006, 03:38:18 am »

OHHHHHHHHH Chroooooommmmme......

Preparing another order dude.

javeryh · « **Reply #69 on:** July 17, 2006, 03:48:15 pm »

OK, looks like this thread is EXACTLY what I'm looking for... anyway, I need 16 different stickers for my cocktail cab... each player's control panel has 4 admin buttons and I want to label them. There are two "player 1" panels and two "player 2" panels - they will be identical except for the start buttons. This is I guess what I'm going for but I haven't worked out every detail yet (this was just a quick mock-up done in MS Paint!):

Any opinions? THANKS!!

MikeDeuce · « **Reply #70 on:** July 18, 2006, 05:51:51 pm »

Hmm... when it comes to icons/text labels, I usually like to stay consistent when it's in/on the same region/plane, but that is a tricky situation with the small buttons. And "Player 1 Start" or something similar wouldn't work with the space, either. Maybe "Start", but the little guy shape is hard to top.

Well, I'm no help, hah.

leapinlew · « **Reply #71 on:** August 08, 2006, 12:25:02 pm »

Mike,

You still doing these? If so - how much for a weeded set of stickers?

MikeDeuce · « **Reply #72 on:** August 08, 2006, 03:58:00 pm »

Hey hey, yep, still makin' em. Prices are the same from day 1, and are listed on this post:

http://forum.arcadecontrols.com/index.php?topic=49291.msg479699#msg479699

P1-4 set is $1.45 shipped and the variety set is $10 shipped (for a weeded sheet).

thanks!
mike

lettuce · « **Reply #73 on:** August 14, 2006, 03:17:25 pm »

What other stickers do you do mate, im after, Pause, Exit, Menu, Enter, etc, but not curved like the ones you posted awhile back, can u help?

MikeDeuce · « **Reply #74 on:** August 14, 2006, 04:17:44 pm »

I'll do pretty much anything the machine is capable of

I've done a bunch of sets with straight text in custom fonts as well, so if you have one in mind let me know and I'll get you a quote (for easy stuff like text, prices are usually close to the default set).

Quote from: lettuce on August 14, 2006, 03:17:25 pm

What other stickers do you do mate, im after, Pause, Exit, Menu, Enter, etc, but not curved like the ones you posted awhile back, can u help?

Zapatistab · « **Reply #75 on:** August 16, 2006, 11:45:34 am »

Do you sell the single player CP's? I've been looking for a simple CP with plexi glass. No Paint, no artwork. I would drill my own button holes and mount the joystick myself. (Undecided about what arcade parts to use)

Thanks.

MikeDeuce · « **Reply #76 on:** August 17, 2006, 01:58:03 pm »

alas no... for I am but a rookie wood wrassler... but thanks for the consideration! I bet Nitewalker ( http://forum.arcadecontrols.com/index.php?action=profile;u=6207 ) or Knievel ( http://forum.arcadecontrols.com/index.php?action=profile;u=3665 ) could do something like that, though

Quote from: Zapatistab on August 16, 2006, 11:45:34 am

Do you sell the single player CP's? I've been looking for a simple CP with plexi glass. No Paint, no artwork. I would drill my own button holes and mount the joystick myself. (Undecided about what arcade parts to use)

Thanks.

NiteWalker · « **Reply #77 on:** August 17, 2006, 02:08:53 pm »

Quote from: Zapatistab on August 16, 2006, 11:45:34 am

Do you sell the single player CP's? I've been looking for a simple CP with plexi glass. No Paint, no artwork. I would drill my own button holes and mount the joystick myself. (Undecided about what arcade parts to use)

Thanks.

I make and sell single player customs. PM for details.

@Mike:
You are too kind to mention me. Your skills are past a beginner's by far...

Also, preparing another order

Zapatistab · « **Reply #78 on:** August 17, 2006, 04:46:12 pm »

Thanks! P.M sent to Nite Walker.

Knievel · « **Reply #79 on:** August 23, 2006, 09:07:36 pm »

Can't say enough good things about this guy. Lightning fast service that's adding a touch of class to all my machines.

I'm not eligible to vote but I'm going to throw it out there anyway...

MIKE FOR PRESIDENT!


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news