Main > Main Forum

Missing wire in jamma harness, how to replace ?

Pages: (1/1)

markymarky99:

Hi, I have an arcade cabinet already wired up JAMMA, however, I need number 15 on the harness to hookup an interlock switch so that I can negotiate the multi board menu system.  The entire wire and pin is missing, there's just a hole there.  I've purchased pin after pin but can't seem to find what I need to insert into this hole and run a new wire.  I don't want to wire directly to the jamma board as this is a 500 dollar unit.  Not worth ruining.  What is another way of getting this stubborn number 15 pin to work for me ?  any ideas ?  The hole in the harness seems to be bigger than the standard jamma harness of today, this is an old cabinet.

Ken Layton:

If your Jamma harness connector is the black one then Bob Roberts sells the correct pins to insert.

If your Jamma harness connector is the tiny blue one you're screwed.

Pages: (1/1)

Go to full version