Main > Main Forum
Missing wire in jamma harness, how to replace ?
(1/1)
markymarky99:
Hi, I have an arcade cabinet already wired up JAMMA, however, I need number 15 on the harness to hookup an interlock switch so that I can negotiate the multi board menu system.  The entire wire and pin is missing, there's just a hole there.  I've purchased pin after pin but can't seem to find what I need to insert into this hole and run a new wire.  I don't want to wire directly to the jamma board as this is a 500 dollar unit.  Not worth ruining.  What is another way of getting this stubborn number 15 pin to work for me ?  any ideas ?  The hole in the harness seems to be bigger than the standard jamma harness of today, this is an old cabinet.
Ken Layton:
If your Jamma harness connector is the black one then Bob Roberts sells the correct pins to insert.

If your Jamma harness connector is the tiny blue one you're screwed.
Navigation
Message Index

Go to full version