| Main > Software Forum |
| Ultimarc Ipac Programming issue |
| (1/2) > >> |
| leapinlew:
being a "computer person" I expected the building of the cab to be the hard part and the computer stuff to be the easy part! Perhaps someone can tell me what I'm doing wrong - I have the ipac wired up to a 2 joystick with 2 buttons each, I also have a quarter (5) and player 1 (1) button and a quarter (6) and player 2 button. All those buttons work fine. I have a dedicated Pause and Quit button but I cannot program them to be P and Esc. I opened the ipac config utility. Create a blank board and assign all the keys to the board and save my config. Then I click the program utility and it says it's programming the ipac, but when I open notepad the changes didn't take. I wired the Escape and Pause button to player 1/2 button 8. Any help will be greatly appreciated. |
| loadman:
I would use this rather than the GUI's (Overkill in my opinion) http://www.ultimarc.com/interact.html It's simple and effective Good Luck |
| sc1103:
In the settings option, did you set your IPAc to the right model and connection? If this has a jumper on it, is it set to ALT, not MAME? |
| Brax:
--- Quote from: sc1103 on January 23, 2006, 09:37:49 pm ---In the settings option, did you set your IPAc to the right model and connection? If this has a jumper on it, is it set to ALT, not MAME? --- End quote --- That's my first guess too. You have to switch the jumper to ALT to be able to modify the programming. If it's not that... well, we have a starting point to work from. |
| leapinlew:
I see jumpers on the board, but there currently isn't anything jumped - it's all exposed pins. What I did to fix the problem was open notepad and hit cntrl+alt+p to program it. I never could get the ipac program to work. Thanks for the help. I knew the answer was on the board somewhere. The search on the forum kind of sucks, I ended up going to google typing in search terms that connected me to the BYOAC forums. |
| Navigation |
| Message Index |
| Next page |