| Main > Lightguns |
| WOW New LightGUN Info !!! Woot!!! :) |
| << < (148/378) > >> |
| Fozzy The Bear:
--- Quote from: Gh0sty on February 05, 2006, 06:05:55 pm ---Fuzzybear had a good idea, we should made a sticky thread about what emulator is used succesfully in combination with this Topgun, it would help everyone and safe alot time. --- End quote --- Thanks for the credit Ghosty.... But it wasn't me... LOL and It's Fozzy not Fuzzy ;D LOL .... Best Regards, Julian (Fozzy The Bear) P.S. URGHHH!! Who changed all the emoticons to space invaders... Horrible!! |
| ErikRuud:
Randy, The laser will stay on no matter where the gun is pointed during calibration mode. If the laser does not blink during calibration, the gun cannot see all of the LEDS or a reflection is causing trouble. In my cabs current location there is a white wall behind the shooter. Besides the laser alignment problem, I was noticing a few odd spots where the gun couldn't track. I tried turning off some of the lights, but that did not help. I began to wonder if IR from the leds was reflecting off the wall and onto the monitor glass. I turned my cab about 20 degress to the right and the problem went away. I'll have to check with my camcorder toinight and see if I can see the IR reflections. |
| Smog:
ErikRuud, You are right because as we discussed some messages ag |
| Gh0sty:
--- Quote from: ErikRuud on February 06, 2006, 09:57:32 am ---If the laser does not blink during calibration, the gun cannot see all of the LEDS or a reflection is causing trouble. --- End quote --- I had a lamp on behind my Monitor, an that caused alot trouble. external lights who come from the same direction as the Monior towards the gun will make problems. I removed the lamp and everything was ok. |
| ErikRuud:
--- Quote from: Smog on February 06, 2006, 09:59:54 am ---ErikRuud, You are right because as we discussed some messages ag --- End quote --- |
| Navigation |
| Message Index |
| Next page |
| Previous page |