| Main > Main Forum |
| Hooking up a Wingman Warrior Spinner to an Opti-pac |
| (1/1) |
| mbodde:
Just wondering if anyone has been able to do this. I have tried hooking up four of the five wires (left out the blue wire) that come out of the optical board to the opti-pac but it does not work. I figure I have to do some modes to the board to get it to work. Any help would be greatly appreciated. Mark |
| Kremmit:
I went looking for this before, too. I never made it work. I have read that Logitech mice don't work for mouse hacks, the optic board in the Warrior may well suffer from the same incompatibility problem. I did find some info somewhere about an old serial mouse driver that was supposed to make it work with MAME as a serial mouse, but it never did for me. I should point out that I got my Warrior at the Slave Nation Army thrift store, and I don't know if it works right anyway. It might be easier to scrap the electronics in the Warrior, and use a cheap mouse's guts instead. |
| Navigation |
| Message Index |