Main > Main Forum

Mini-Pac vs. IPac2

Pages: (1/2) > >>

lovespicyfood:

I'm a little confused...

I'm in the planning stages of my cabinet build.  I would like to build a cab w/ a two person cp consisting of 2 joysticks, a trackball, spinner and buttons.

It seems to me the Mini-Pac would be the way to go since I *believe* it will handle all my inputs.  I was originally thinking that I would need an Ipac2 and an Opti-Pac.

Is there something I'm missing?  Is the Mini-Pac what I should purchase?

Thanks for your help!


cholin:

Minipacs are really misunderstood in my opinion.  They are the *perfect* arcade interfaces!  They can do the trackballs and the inputs you need all in one REALLY small board!  The problem with that is that people dont like to wire it themselves, but Andy also offers a wiring kit.  Buy the minipac -- more functionality than the iPac, the feature of the iPac that sells is the simplicity of hookin up wires...

Grasshopper:

And the Mini-Pac is significantly cheaper than the Ipac2.

In my opinion, weighing up all the various factors, the Mini-Pac is the best encoder currently available. The only reason not to buy one is if you need more than 28 inputs.

Also, I think the screw connectors are overrated and not worth paying extra for. It's just as easy to hack an old IDE cable.


lovespicyfood:

Thanks for the replies!

It definitely seemed like the better deal, however, I thought I was just not seeing something about it.  I'll be ordering one very soon!

Thanks again!

PCtech:

I have used the Mini-pac in the past and they are great.

If this is your first one, or you don't like to hack cables, buy the harness, but be sure to get the one that allows for the kind of trackball you plan to use.  The harness is kinda expensive, but well worth it to save time and trouble.  The software is pretty easy to use, but you don't even need it unless you plan to re-map buttons.

I have not used the other encoder, and it is probably a good product too, but I had the same CP setup, 2-layer, buttons, trackball, and spinner, and the mini-paq worked flawlessly.

Good Luck!

Pages: (1/2) > >>

Go to full version