| Main > Main Forum |
| What are these parts in my cab? |
| << < (2/2) |
| RayB:
If you are going to MAME this, then you do not need the power supply to be "active" (powered). You'll be using your own PC's power supply instead. The monitor controls thingy you have mounted to the side of that cab, should ideally be mounted somewhere near the FRONT of the cab. The whole purpose of that board with knobs is to adjust the picture, and ideally you need to be LOOKING AT the monitor to do that. It's not high prioryt but some time down the line you should mount it somewhere accessible either through your coin door, or through your control panel area (when you have the control panel opened/removed). As for hooking up AVGA to the monitor, that part is easy. Get a JPAC. |
| Navigation |
| Message Index |
| Previous page |