| Main > Main Forum |
| How can I mod my OmniStick PRODIGY Switcher dodad? |
| << < (2/5) > >> |
| allroy1975:
--- Quote from: Quarters on January 17, 2006, 10:48:31 pm ---My only concern would be how the stick hole would look through the epoxy. Do you plan to use dust washers on top? --- End quote --- Oh man, I remember when you buit that cab, GREAT design. Yeah, yours look SUPERB! I was thinking about using home made dust washers. It kinda depends on what it looks like once I get the base up as high as I can. |
| danny_galaga:
how handy are you with drills and and a round file? you could make the panel top out of 1.6mm steel. the 4/8 way switch im guessing moves in an arc so you need to drill a hole at each end of the arc and jigsaw it (with steel cutting blade naturally). im thinking of using the omnis myself and i too would like to hide the plate. im thinking of makng my panel from fibreglass though... |
| allroy1975:
huh? The top panel will be made of the clear epoxy goo. like a bar top. if I wanted metal on top, I'd just go with the plate that came on the joystick. Jigsawing is almost definatly how I'll go for the switch. I just hope this epoxy doesn't chip or anything. Any advise on how to cut the stuff safely? Allroy |
| Quarters:
I suspect the epoxy will kind of melt, not chip. I'm not speaking from experience though. While your working with the epoxy You may want to spread some on a scrap piece of birch and try cutting/drilling that first. Test pieces are always a good idea. while your at it you could experiment with stains under the epoxy. Sounds like a cool cp. Be sure to post pics of your results. |
| allroy1975:
--- Quote from: Quarters on January 18, 2006, 12:14:33 pm ---While your working with the epoxy You may want to spread some on a scrap piece of birch and try cutting/drilling that first. Test pieces are always a good idea. while your at it you could experiment with stains under the epoxy. Sounds like a cool cp. Be sure to post pics of your results. --- End quote --- it's more of a Pour. You have to mix it 1:1 and then mix it well, but not whip because that will create bubbles, then pour it into the CP. I agree I SHOULD work with a sample piece, but I'm so lazy I hate doing things twice. I mean...I'm not Stingray but I'm not super motivated. ;) Allroy |
| Navigation |
| Message Index |
| Next page |
| Previous page |