| Main > Main Forum |
| How can I mod my OmniStick PRODIGY Switcher dodad? |
| << < (4/5) > >> |
| allroy1975:
Curing: After applying your final coat, the product should be kept in as clean and dust-free an environment as possible. At 80 |
| allroy1975:
Okay, so here's what I got after making the bowl and finding out I DEFINATLY need to use differnt mixing bowls for the 2nd layer.... I beleive that by mixing using the same bowl and everything for some reasy created a LOT of bubbles that aren't really visible in these pictures, but they're there if you look real close. The BIGGEST problems I ran into are: 1. my jig sawed thingy looks like poop in my opinion. I think it will look better when routed from below...I didn't route the underside so cutting through with the jigsaw wasn't easy or very clean. I'll rout that so almost all I have to jig through is the epoxy clear coat stuff and a very thin layer of wood. 2. My swither do-dad is too short to make it up over the epoxy so I need to extend that somehow...wich leads me to my next question.... How can I make that thing longer? in case you don't know what I'm talking about...it's a thing piece of metal that should stick above the CP a little bit and allow you to switch the 4/8 way restrictor plate. I need a metal extender. the thing in the 3rd pic. |
| allroy1975:
sorry. Hoping this bump can get me some more views....earlier in the day...on a Friday. One of the things that has always amazed me about the BYOAC community is how wide a variety of smart people there are and no matter WHAT your question...someone will have an answer or idea or SOMETHING for you. I know we won't let me down this time and that's the reason for the bump. thx Allroy |
| whammoed:
2. If there is room between the dodad and the joystick housing, simply get the right length of aluminum flat bar and attach it to the dodad by drilling a couple holes and using a couple screws/nuts. |
| allroy1975:
DOH! it's SO simple and obvious....GEEZ! i'm a doofus! I'm thinking about trying to wrap something around that post or all these complicated measures of welding something to the top of it... Sometimes the most simple solutions escape me....and it's a little embarassing. thanks allroy ::) |
| Navigation |
| Message Index |
| Next page |
| Previous page |