| Main > Main Forum |
| control panel interface question |
| (1/2) > >> |
| vandel98:
I'm in the process of planning/purchasing for my first cab. My question comes in on the best way to interface the components I have already. 3 Happ Joysticks & 18 buttons (2 8 way and 1 4 way joystick) 1 3" Betson Imperial Trackball PS/2 I was looking at the new Cyclone Spinner which says it interfaces with the optipac http://www.arcadegames4u.com/pc-50-48-cyclone-spinner.aspx Normally I've read that folks will use the optipac for the spinner and the trackball, but this trackball is PS/2. I've got the IPAC2 for the joysticks and buttons. Any thoughts on how I should interface this all together. Should I still use an optipac, go with a minipac. So many options and so much confusion. Thanks, Pete |
| ahofle:
You could go with the Ipac2 for the buttons and sticks and use Randy's new spinner/trackball interface for the spinner (it's cheaper): http://forum.arcadecontrols.com/index.php?topic=47866.0 |
| vandel98:
Does it have an input for my PS/2 trackball? For that matter Does the optipac? |
| jjd:
Did you try plugging the PS/2 plug into your PC to see if it works without another interface board? |
| ahofle:
--- Quote from: vandel98 on January 13, 2006, 11:06:07 am ---Does it have an input for my PS/2 trackball? --- End quote --- |
| Navigation |
| Message Index |
| Next page |