Main > Main Forum

My Homebrew Autopower Peripheral Solution

Pages: << < (2/3) > >>

RayB:

I keep forgetting why people need this? My motherboard is set to power on after power loss. So all I do is plug in my power bar and everything comes on. Wheni find time, I'll have an AC switch that turns on the power bar (same thing). Everything will turn on.

Oh wait. You're using Windows, aren't you?  AHA! Another advantage to DOS!


Cutty:

Wouldn't the power on after power loss be part of the BIOS? You could probably have your cab run windows and it would still start up when plugged in.

Hippo:

This is setup so I dont have to have a mains switch on the cab or reach round to the wall socket to power it up.

Since I have power on keyboard set in the BIOS, one press of any key on ther control panel powers up the complete cab. Also where my cab will be it wont be powered up all the time.

RayB:

You must not own a cat, or have kids.


Hippo:

I dont have a cat cos they are the devil incarnate. But I do have kids and they are welcome to play the cab anytime :)

Pages: << < (2/3) > >>

Go to full version