Main > Main Forum
MiniPac Harness vs. Ultimarc Trackball?
(1/2) > >>
metaHipster:
So I got my MiniPac and wiring harness as well as an Ultimarc Trackball...  I'm confused what to connect where though, since the MiniPac supports Trackball and Spinner, yet the harness only provides 2 of those type of connectors (not counting the extra set which is for power and connects elsewhere on the miniPAC.  I thought it would have 3 (2x for trackball + 1x for spinner).

One of them can be connected to the trackball for a single axis of motion but the other does nothing.  It seems like I may have the wrong harness?  Or am I supposed to hack apart the one that doesn't do anything in order to wire it to the two sets of wires that came with the Trackball?  I had assumed it would just be a push-on sorta thing rather than having to splice stuff.
Scott84:
Email Ultimarc itself.

Andy Warne will help you no problem!
miles2912:
Here is a pic of a connected trackball.  Notice how there are 2 connections on the Mini-pac and the connecting cables that came with the trackball have been removed completely.

Don

metaHipster:
weird - I could have sworn I tried that.
AndyWarne:
The "one axis reversed" problem is fairly common, so I have added an explanation of how to correct this to the Mini-PAC wiring page: http://www.ultimarc.com/mp_inst.html
Hope this helps, drop me an email if not.
Andy W
Navigation
Message Index
Next page

Go to full version