| Main > Main Forum |
| anybody know if LED stuff can be installed into this trackball? |
| (1/1) |
| bossyman15:
3" Diameter White High Lip Trackball http://happcontrols.com/trackballs/56010011.htm i don't see any info if it can be used with this trackball. |
| mccoy178:
You can install LED's in this untill you're blue in the face, but without a translucent ball, it will do no good. If you get a translucent ball, there are two ways to mount lighting. Happs sells a light for it, or there is also two holes on the bottom of the case and you could mount your own led's. I would take route two as you can make that baby glow! Also, get Ponyboy the part number before you buy, he can kill Happs prices and is a straight up go to guy. If he can't get a hold of it immediately, I know there is a guy from Texas on Ebay who is also cheap and usually has it in stock. |
| Trimoor:
You can, and it would look good too. Place the LEDs around the top rim of the trackball, pointing out of the small gap. When lit, the perimeter will glow. |
| Navigation |
| Message Index |