Main > Main Forum
Working coin door..possible?
<< < (2/4) > >>
PhoneLine:
Yep, that is exactly the piece the coin door has.
SirPoonga:
Same as the switch on your pushbuttons (I assume you are not using leafs).

The bottom should be labelled ground.  I think the middle is NO and top is NC.  They should be labelled though.

NO=normally open
NC=normally closed
quarterback:
I believe that coin door buttons are actually opposite than the microswitches used for buttons/joys and the NO and NC placements are switched.   


--- Quote from: SirPoonga on January 04, 2006, 06:11:29 pm ---Same as the switch on your pushbuttons (I assume you are not using leafs).

The bottom should be labelled ground.  I think the middle is NO and top is NC.  They should be labelled though.

NO=normally open
NC=normally closed

--- End quote ---
Kremmit:
Close your eyes, try one, and see if it works.  If it doesn't, switch the wire to the other one.  You can't hurt anything here.
PhoneLine:
Thanks for the info guys, going to try it when I get home from work tomorrow.  My main fear was connecting it wrong and frying something, but since the worst that can happen is it won't work and I have to swap the connections, I'm happy :)

Again, thanks for all the info!   ;D
Navigation
Message Index
Next page
Previous page

Go to full version