Main > Main Forum

Need Advice

Pages: (1/3) > >>

ojelela:

Hi,this is great forum :angel:
Finally I both older cabinet from local shop without monitor,and after years
of planing its time for MAME.Now cabinet came all wired up with coin door and
JAMA harness +wico track ball, my setup will have two 4-8 way joysticks 6 buttons each player,1&2 player buttons happ tr.ball arcade connector not usb,and two pinball buttons.Finally my question is can i use existing harness or should i start from scratch.What is easier way and cheaper to go,because my boss(wife) its already complaining about spending money.
Thanks in advance and Happy New Year to everyone :D

brophog:


--- Quote ---What is easier way and cheaper to go,because my boss(wife) its already complaining about spending money.

--- End quote ---

That's what they're good at.

markrvp:

You can use the Jamma harness already installed.

ojelela:

OK,so i can use J-Pac for all 16 PB and two joystics??That means I have to add more wires to harness since original CP had only 3 PB and trackball.Is there than other way to go than J-Pac and orig. harness because i cant use it for my happ TB

GGKoul:


--- Quote from: ojelela on December 29, 2005, 10:34:28 pm ---OK,so i can use J-Pac for all 16 PB and two joystics??That means I have to add more wires to harness since original CP had only 3 PB and trackball.Is there than other way to go than J-Pac and orig. harness because i cant use it for my happ TB

--- End quote ---

You need 2 boards.. J-Pac for the joystick and buttons and the Opti-pac for the trackball.  Goto www.ultimarc.com for more information how those boards work.

Pages: (1/3) > >>

Go to full version