| Main > Main Forum |
| Need Advice |
| (1/3) > >> |
| ojelela:
Hi,this is great forum :angel: Finally I both older cabinet from local shop without monitor,and after years of planing its time for MAME.Now cabinet came all wired up with coin door and JAMA harness +wico track ball, my setup will have two 4-8 way joysticks 6 buttons each player,1&2 player buttons happ tr.ball arcade connector not usb,and two pinball buttons.Finally my question is can i use existing harness or should i start from scratch.What is easier way and cheaper to go,because my boss(wife) its already complaining about spending money. Thanks in advance and Happy New Year to everyone :D |
| brophog:
--- Quote ---What is easier way and cheaper to go,because my boss(wife) its already complaining about spending money. --- End quote --- That's what they're good at. |
| markrvp:
You can use the Jamma harness already installed. |
| ojelela:
OK,so i can use J-Pac for all 16 PB and two joystics??That means I have to add more wires to harness since original CP had only 3 PB and trackball.Is there than other way to go than J-Pac and orig. harness because i cant use it for my happ TB |
| GGKoul:
--- Quote from: ojelela on December 29, 2005, 10:34:28 pm ---OK,so i can use J-Pac for all 16 PB and two joystics??That means I have to add more wires to harness since original CP had only 3 PB and trackball.Is there than other way to go than J-Pac and orig. harness because i cant use it for my happ TB --- End quote --- You need 2 boards.. J-Pac for the joystick and buttons and the Opti-pac for the trackball. Goto www.ultimarc.com for more information how those boards work. |
| Navigation |
| Message Index |
| Next page |