Main > Main Forum
WTBorrow 3.25" Hole Saw
LPZ:
I tried a 3", but the hole did not accomodate the black case that the ball is in. I measured with a micrometer, and it comes out to 3.25 to accomodate it.
quarterback:
--- Quote from: LPZ on December 29, 2005, 05:06:47 pm ---Thanks for all the help fellas.
Quarterback--Checked the local harbor frieght. Every size except 3 1/4.
--- End quote ---
Sorry, when I said "something like that", I was actually referring to the post that I quoted with the ASCII drawing of a resizable hole cutter. My HF had a couple of them. I'll take a pic of the one I bought.
quarterback:
Here's a pic. Like I said, my HF had a couple different ones. In my first post I said I got the one with three cutters, but that's incorrect. I got the one with two cutting blades because mine will cut holes from 1" to 5" in diameter. The three-bladed one wouldn't do up to 5" and I needed to cut a 4"+ hole. The one with three blades was actually 'better' because all three blades would extend from a center disc at the same time. I couldn't find either one on line, but at my HF they were over near all the drill bits and stuff.
Anyway, here's the pic.