| Main > Main Forum |
| Joystick mouting problem/question |
| (1/1) |
| ooby:
G'day all, I have a question/problem that I hope someone can help with. I'm building my first cabinet and it's come time to put the control panel together. I have bought the Competition Joysticks from Happ controls and I cannot get them together properly, the shaft of the JS doesn't go through the bottom far enough to attach the cir clip to it. I think that the spacer is too big Has anyone else had this problem or am I doing something totally stupid? I don't really want to grind off some mm's off the shaft either Any ideas? Thanks |
| markrvp:
Sometimes the handle gets stuck in the base before it gets down all the way. Jiggle it a little bit and push down. Also keep in mind that you will have to push it down really hard to compress the spring enough for the e-clip groove to be exposed below the actuator (square plastic thing). As I re-read your post I am reminded that a lot of new arcade things require brute force to get them together the first time. Don't be afraid to push on it. |
| ooby:
Thanks for that - solved my problem. We were trying to push down the shaft but we had to push the bottom end to compress the spring and attach the cir / e-clip |
| Navigation |
| Message Index |