| Main > Main Forum |
| Happ competiton installation question! |
| (1/1) |
| AE35:
Hi all! Please look at this page when reading the post :) http://www.happcontrols.com/joysticks/competition_joy_e.htm I've installed a Happ competition in my metal panel, but at first the stick was too long, so I removed the white round thing called 95-0194-00 to get it shorter. Now the length is pretty good, and the spring-back is so-so- Not near as fast as the former, very old, joysticks on the machine. When I used the white round thingy(95-0194-00), it seemed that I need to push the white square(actuator?) a little back to get the clip(43-0019-00) on....I didn't need to do that now without the round thing(95-0194-00) So which is the right way to assemble this joystick? Is it supposed to be set at different heights? Thanks, Nicholas EDIT: I actually tried taking the round(95-0194-00), and putting it on the other end, push it in and apply the clip. This seemed very good, but I think the spring is too tight or something, because movement was jerky. |
| Navigation |
| Message Index |