| Main > Project Announcements |
| RoboMame |
| << < (3/7) > >> |
| Timoe:
This sounds kinda weird but, can I see a "brighter shot of the control panel straight on? :o |
| dmsuchy:
sure, I used baltic birtch that has been rounded over with a router for the end caps of the control panel. I orginally planed on using rounded over baltic birch for the top part of the cabinet, but I didn't like the look. Soooo I redid it using laminate covered MDF with black Tmolding. I was going to replace the CP end caps with MDF but figured the baltic birch didn't look that bad and matched the keyboard drawer. Any opinons? Also the CP is bolted down to the cab on 2 slots. This allows the CP to be moved back about 6" away from screen for those power hits on the trackball while playing Golden Tee. |
| danny_galaga:
excellent artwork!! and the panel isnt 'franken' (",) |
| dmsuchy:
Thanks, I used Tstick pluses so I could just switch from 4way to 8way so not to have the panel too "clutered". Although a dedicated 4 way in the center would have been nice, but I'll probally do that on my next cab which will be a dedicated vertical cab. I have the coin door wired so you can push the "coin return" for credits, thus allowing me not to have credit button. Although most of my buddies just keep pressing 5 on the mini keyboard. |
| NinjaEpisode:
Sharp machine! I'm diggin on the multiple colors used on the sides, etc. Makes it definitely stand out in a very stylish way. Thumbs up dude! |
| Navigation |
| Message Index |
| Next page |
| Previous page |