Main > Main Forum

X-Arcade, anybody got one?

Pages: (1/1)

Kremmit:

I'm actually looking for dimensions on the box.  Not the top panel, just the box underneath. 

I'm putting a standalone control panel together for my brother and I've ended up with a de-populated top panel from an X-Arcade 2-player panel.  It's in the mail, but I'd like to get started on building the box now, as the clock is ticking if I'm to have it done by Christmas.

Thanks!

Stobe:

Its your lucky day.  I happen to have a couple empty xarcade boxes (and didn't have to look too hard for my tape measure)

Bottom dimensions are: 21.5" W x 8.125" L
(Thats outside dimensionsusing roughly 1/2" wood)

Side dimensions are Front = 1 3/4"  -  Back - 3 1/16"

I hope this makes sense, and helps.  If you need clarification, I can sketch it out for you.

Also, once you get the top, you shoulc be able to see the small screw holes that attached the top to the frame.  They used 1 small L bracked on each side, 3 on the fron, and 2 on the back.  (yours may vary).

-Stobe

Kremmit:

Awesome, thanks!

(guess I should have posted looking for a complete empty box before I picked up that top panel, eh?)

Pac-man:

Thanks for the info, I was looking for that too.

Do you happen to know the control panel layout speacings etc too?

Thanks in advance

Pages: (1/1)

Go to full version