| Main > Main Forum |
| Replacing Joystick Microswitches? |
| (1/4) > >> |
| eyal8r:
Hey guys- I have a joystick that has some lag to it. Sometimes it doesn't move the character at all, or, you have to hit it twice before it moves, or, there's a delay from the time you move the stick to the time the character moves. It feels like the switches are bad- which, I dont know how since I haven't used it very much since I got it. Does this sound like the problem? And, how/where can I replace the switches? I think radio shack has them, but, the metal prong on the switch is too long. Will that work, and I can just cut the prong down to the correct size? Thanks |
| Jabba:
What kind of joystick are you talking about? |
| eyal8r:
ummm- not sure- it's one of the popular ones- can switch between a 4 & 8 way by pulling up and twisting it... |
| brophog:
The only one that can do that is the t-stick plus. Contact Andy at ultimarc.com about getting replacement switches. |
| Jabba:
Ahh, T-Stick. I have one at home. I'll have a look and see when I get home and post later |
| Navigation |
| Message Index |
| Next page |