| Main > Main Forum |
| Keywiz +5v connection |
| (1/2) > >> |
| scorpio1968:
Does anybody know what the +5V connection on the Keywiz encoders is used for? thanks Scorpio |
| Tiger-Heli:
Generally, power to an Opti-PAC in serial mode (don't think the USB Opti-PAC needs it), also possibly LED's (with a dropping resistor) for coin door lights, etc. |
| scorpio1968:
thanks! No chance it could be used to power illuminated push buttons? |
| Tiger-Heli:
--- Quote from: scorpio1968 on December 13, 2005, 02:19:20 pm ---thanks! No chance it could be used to power illuminated push buttons? --- End quote --- Low-current LED illuminated push buttons (one or two) - sure. Incandescent lamp or all the LED's on the entire illuminated button CP - probably not. But RandyT would be a better person to ask. |
| Havok:
The optical joysticks require 5 volts to work - that is most likely what it was really designed for. For all the blinky lights, you want a LED Wiz... |
| Navigation |
| Message Index |
| Next page |