Main > Main Forum
wire connectors
(1/1)
deadmoney5:
Hey all,

I am gonna connect a p360 to my ipaq board now that I know where to connect the ground and 5v wires.

My question is what kind of connector do I use to connect the wire to the pins?

It must be a pretty small connector!!
deadmoney5:
and since I am already using the ground pin for the illuminated trackball, I assume I can just splice the ground from the P360 into the same pin connector?
markrvp:
The pin header on the Ipac uses .100 pin spacing - the same as the pinout on an IDE cable and the same as the pin headers on your motherboard that you connect the power & reset switches to. 

An easy solution to use is a spare CD-Rom internal audio cable.  The connector on that is the correct spacing.
Navigation
Message Index

Go to full version