Main > Main Forum
Trying to mount T-Stik in a metal CP?
Jabba:
I looked at my website where I documented my build. From it I foiund this...
I used the 1/4" to cut the holes for the carriage bolts as I am using 1 and 1/2 inch 1/4 carriage bolts to mount the joystick to the CP. (my CP was 3/4" MDF...).
CheffoJeffo:
--- Quote from: javeryh on December 02, 2005, 02:43:52 pm --- i'm also looking for a black piano hionge but I can't find it anywhere. I'm not sure how paint would adhere to that though with all the movement...
--- End quote ---
I had the same problem ... ended up buying brass (was on sale), then roughed it up a bit with with wire brush attachment on the dremel, wiped it down, then primed and finished with spray paint. I kept the coats very light and moved the hinge after each coat. No problems to date, but then I haven't opened any of those panels much.
Cheers.
javeryh:
--- Quote from: CheffoJeffo on December 02, 2005, 07:32:43 pm ---
--- Quote from: javeryh on December 02, 2005, 02:43:52 pm --- i'm also looking for a black piano hionge but I can't find it anywhere.
--- End quote ---
--- End quote ---